diff --git a/README.md b/README.md
index e69de29..b83431c 100644
--- a/README.md
+++ b/README.md
@@ -0,0 +1,657 @@
+# floppy-utils
+
+Bash toolkit for retro floppy work on Linux: create and edit disk images, archive physical floppies to files, and write images back to a USB floppy drive—without memorizing `dd`, `losetup`, and mount options.
+
+Designed for day-to-day use with a **USB floppy drive** (removable `/dev/sdX` that changes between machines). Loop mounts are kept separate from the physical drive so you can work on `.img` files offline and only touch hardware when reading or burning.
+
+**Tested hardware:** Mitsumi SmartDisk USB UFDD (`03ee:6901`), appearing as `/dev/sda`, FAT12 volumes, automount via udisks at `/media/$USER/<LABEL>`.
+
+---
+
+## Table of contents
+
+- [What it does](#what-it-does)
+- [Project layout](#project-layout)
+- [Requirements](#requirements)
+- [Installation](#installation)
+- [Configuration](#configuration)
+- [Quick start](#quick-start)
+- [Command reference](#command-reference)
+- [Workflows](#workflows)
+- [Device selection](#device-selection)
+- [Physical drive vs disk images](#physical-drive-vs-disk-images)
+- [Safety](#safety)
+- [Troubleshooting](#troubleshooting)
+- [Legacy wrappers](#legacy-wrappers)
+- [Limitations](#limitations)
+
+---
+
+## What it does
+
+| Area | Capability |
+|------|------------|
+| **Images** | Create blank 360K / 720K / 1.44M `.img` files |
+| **Edit** | Loop-attach images, optional FAT format, mount under `$FLOPPY_MEDIADIR` |
+| **Archive** | Sector-accurate read from physical floppy → image file |
+| **Restore** | Burn image to physical floppy with confirmation |
+| **USB FDD** | Detect drive, refresh after disk swap, safe USB disconnect (`power-off`) |
+| **Visibility** | List devices, attached state, full status |
+
+All operations go through a single CLI: **`floppy`** (with subcommands). Status messages go to **stderr** so command substitution (e.g. device paths) is not corrupted.
+
+---
+
+## Project layout
+
+```
+floppy-utils/
+├── README.md              This file
+├── check-deps.sh          Debian dependency check / apt install
+├── install.sh             Install scripts to ~/.local/bin
+├── config.example         Sample ~/.config/floppy-utils/config
+└── src/
+    ├── floppy             Main CLI
+    ├── floppy-make        Legacy → floppy make
+    ├── floppy-attach      Legacy → floppy attach
+    ├── floppy-burn        Legacy → floppy burn
+    └── lib/
+        └── common.sh      Shared logic (sourced by floppy)
+```
+
+There is no daemon. Scripts use `sudo` when not root for `dd`, `blockdev`, `losetup`, and mount operations.
+
+---
+
+## Requirements
+
+### Supported platforms
+
+- **Primary:** Debian-based distributions (Debian, Ubuntu, Raspberry Pi OS, Linux Mint, Pop!_OS, Kali, Devuan, etc.)
+- **Others:** Commands are checked on any Linux; `check-deps.sh --install` refuses non-Debian systems
+
+### Required commands
+
+| Command | Debian package | Used for |
+|---------|------------------|----------|
+| `lsblk` | util-linux | Device size, label, mount points |
+| `blockdev` | util-linux | Sector count for read/burn |
+| `losetup` | util-linux | Attach/detach loop devices |
+| `findmnt` | util-linux | Mount inspection |
+| `blkid` | util-linux | Filesystem / label detection |
+| `mount`, `umount` | mount | Loop and manual mounts |
+| `dd` | coreutils | Read, burn, create images |
+| `readlink` | coreutils | Resolve paths |
+| `mkfs.vfat` | dosfstools | Format new images on attach |
+
+### Recommended commands
+
+| Command | Debian package | Used for |
+|---------|------------------|----------|
+| `sudo` | sudo | Non-root operation |
+| `udisksctl` | udisks2 | Unmount/mount physical floppy (desktop integration) |
+| `udevadm` | udev | Settle after media change (`refresh`) |
+| `eject` | eject | Optional media-change hint (`refresh --eject`) |
+| `fdisk` | util-linux | Partition info saved on new formats |
+
+### Check and install (Debian)
+
+```bash
+cd /path/to/floppy-utils
+
+./check-deps.sh              # list OK / missing
+sudo ./check-deps.sh --install   # apt install missing packages
+./check-deps.sh -q           # quiet; used by install.sh
+```
+
+`install.sh` runs the quiet check first and exits if required tools are missing.
+
+---
+
+## Installation
+
+### 1. Dependencies
+
+```bash
+sudo ./check-deps.sh --install
+```
+
+### 2. Scripts on PATH
+
+**Option A — install to `~/.local/bin` (recommended)**
+
+```bash
+./install.sh
+```
+
+Ensure `~/.local/bin` is in your shell `PATH` (add to `~/.bashrc` or `~/.zshrc` if needed):
+
+```bash
+export PATH="$HOME/.local/bin:$PATH"
+```
+
+**Option B — run from source**
+
+```bash
+export PATH="/path/to/floppy-utils/src:$PATH"
+floppy help
+```
+
+### 3. Optional configuration
+
+```bash
+mkdir -p ~/.config/floppy-utils
+cp config.example ~/.config/floppy-utils/config
+# Edit: FLOPPY_DISKDIR, FLOPPY_DEVICE, etc.
+```
+
+### Verify
+
+```bash
+floppy help
+floppy devices -v
+floppy list
+```
+
+---
+
+## Configuration
+
+Settings load in this order:
+
+1. Built-in defaults
+2. `~/.config/floppy-utils/config` (shell snippet, sourced if present)
+3. Environment variables (override config file)
+
+### Variables
+
+| Variable | Default | Description |
+|----------|---------|-------------|
+| `FLOPPY_DISKDIR` | `$HOME/Retro/BLANKS` | Directory for `.img` files (`make`, `read`, `attach` by name) |
+| `FLOPPY_MEDIADIR` | `/media/$USER` | Base directory for loop mounts (`attach`) |
+| `FLOPPY_DEVICE` | *(unset)* | Default block device for physical ops (`/dev/sda` on a dedicated retro box) |
+| `FLOPPY_DEVICE_MATCH` | `mitsumi\|ufdd\|fdd\|floppy` | Extended regex; boosts USB floppy scoring in `devices` / auto-pick |
+| `FLOPPY_DEFAULT_SIZE_KB` | `1440` | Default image size for `make` / `attach` |
+
+### Example config file
+
+```bash
+# ~/.config/floppy-utils/config
+FLOPPY_DISKDIR="$HOME/Retro/BLANKS"
+FLOPPY_MEDIADIR="/media/$USER"
+FLOPPY_DEVICE=/dev/sda
+FLOPPY_DEFAULT_SIZE_KB=1440
+```
+
+### Example one-shot env
+
+```bash
+FLOPPY_DEVICE=/dev/sda floppy read dosboot -y
+```
+
+---
+
+## Quick start
+
+```bash
+# 1. USB floppy connected, disk inserted
+floppy refresh --mount
+floppy devices -v
+
+# 2. Archive floppy to an image file
+floppy read -y                    # name from volume label or mount dir
+
+# 3. Edit the image without hardware
+floppy attach disk
+# ... copy files under /media/$USER/disk ...
+floppy detach disk
+
+# 4. Write image back to a floppy
+floppy refresh                    # after inserting blank or target disk
+floppy burn disk.img -d /dev/sda
+```
+
+---
+
+## Command reference
+
+Invoke as `floppy <command> [options] [args]`. Run `floppy help` for a short summary.
+
+### `make` — create blank image
+
+```bash
+floppy make [name] [-s 360|720|1440]
+```
+
+- Creates `$FLOPPY_DISKDIR/<name>.img` filled with zeros
+- Omits `name` → random name `floppy<digits>`
+- Does not mount or format
+
+**Examples**
+
+```bash
+floppy make blank1440
+floppy make dos720 -s 720
+```
+
+---
+
+### `attach` — loop-mount an image for editing
+
+Aliases: `mount`
+
+```bash
+floppy attach [name|path] [-s SIZE] [--format] [--no-format]
+```
+
+- **No args:** new random 1.44M image, formatted vfat, mounted
+- **`name`:** use/create `$FLOPPY_DISKDIR/<name>.img`
+- **`path`:** absolute or relative path to an existing `.img`
+- New or raw images: formatted **vfat** unless `--no-format`
+- Mount point: `$FLOPPY_MEDIADIR/<name>` (not the FAT volume label path used by udisks for physical disks)
+- Uses `losetup --find --show` and mounts the **loop device** (not the file twice)
+
+**Examples**
+
+```bash
+floppy attach
+floppy attach mydisk -s 720
+floppy attach /archive/old.img
+```
+
+---
+
+### `detach` — unmount and release
+
+Aliases: `umount`
+
+```bash
+floppy detach <name|mountpoint|loop|label>
+```
+
+Accepts:
+
+- Image name (`bootdisk` → `$FLOPPY_MEDIADIR/bootdisk` or loop for that image)
+- Full mount path (`/media/user/BOOTDISK`)
+- Loop device (`/dev/loop0`)
+- Physical volume label directory (`BOOTDISK` under `$FLOPPY_MEDIADIR`)
+
+For physical `/dev/sdX` mounts, only **unmounts**; does not disconnect USB.
+
+---
+
+### `refresh` — re-probe after swapping floppies
+
+Aliases: `rescan`, `reload`
+
+```bash
+floppy refresh [-d DEV] [--mount] [--eject] [-w SEC]
+```
+
+Run whenever you change disks **without** unplugging USB. For end of session, use **`floppy disconnect`** instead (see below).
+
+1. Unmount stale filesystem (udisks or `umount`)
+2. `blockdev --flushbufs`
+3. Optional `eject` (`--eject`) for drives that need it
+4. `udevadm settle` and short wait (`-w`, default 2 seconds)
+5. Re-probe capacity; show before/after `lsblk` summary
+6. With `--mount`, mount new media via udisks if detected
+
+**When to use:** `devices` still shows old label/size, automount behaves oddly, or `read` fails after a swap.
+
+**Examples**
+
+```bash
+floppy refresh
+floppy refresh --mount
+floppy refresh --eject -w 3
+floppy refresh -d /dev/sda
+```
+
+---
+
+### `disconnect` — safe USB removal (end of session)
+
+Aliases: `power-off`, `eject-usb`
+
+```bash
+floppy disconnect [-d DEV]
+```
+
+Use when you are **done with the USB drive** and want to unplug the cable. **Not** for swapping floppies (use `refresh`).
+
+Steps performed:
+
+1. Unmount any volume on the device (`udisks` or `umount`)
+2. `blockdev --flushbufs` and `sync`
+3. `udisksctl power-off -b DEV` (falls back to `eject` if power-off fails)
+
+```bash
+floppy disconnect
+floppy disconnect -d /dev/sda
+```
+
+On success you should see: **Safe to unplug the USB floppy drive now.**
+
+---
+
+### `read` — archive physical floppy to disk dir
+
+Aliases: `archive`
+
+```bash
+floppy read [name] [-d DEV] [-y] [--force] [--strict]
+```
+
+- Reads **entire device** sector-by-sector into `$FLOPPY_DISKDIR/<name>.img`
+- Sector count from `blockdev --getsz` (2880 × 512 bytes for 1.44M)
+- Default `dd` conv: **`noerror,sync,fsync`** (tolerates bad sectors on old media)
+- Unmounts drive before read; 1 second settle
+- **`--strict`:** stop on first I/O error instead
+
+**Default name** (if `name` omitted):
+
+1. FAT volume label (sanitized, e.g. `DISK      2` → `disk_2`)
+2. Else basename of mount point (e.g. `disk` from `/media/user/disk`)
+3. Else random `floppy<digits>`
+
+**Examples**
+
+```bash
+floppy read -y
+floppy read bootdisk -d /dev/sda -y
+floppy read --strict -y    # fail fast on errors
+```
+
+---
+
+### `dump` — raw dump to any path
+
+Aliases: `copy`
+
+```bash
+floppy dump -o FILE [-d DEV] [-y] [--force] [--strict]
+```
+
+Same read path as `read`, but **`-o`** is required (any file path, or `-` for stdout). Does not use `FLOPPY_DISKDIR` naming rules.
+
+```bash
+floppy dump -o /tmp/floppy.raw -d /dev/sda -y
+floppy dump -o - -d /dev/sda | sha256sum
+```
+
+---
+
+### `burn` — write image to physical drive
+
+Aliases: `write`
+
+```bash
+floppy burn <image> [-d DEV] [-y]
+```
+
+- Resolves image: path, or name in `FLOPPY_DISKDIR`
+- **Never** hardcodes a device; uses `-d`, `FLOPPY_DEVICE`, or interactive pick
+- Confirms unless `-y`; warns if mounted, then unmounts
+- Writes with `dd bs=512 conv=fsync`
+
+```bash
+floppy burn disk.img -d /dev/sda
+FLOPPY_DEVICE=/dev/sda floppy burn dosboot.img -y
+```
+
+---
+
+### `devices` — list removable block devices
+
+Aliases: `list-devices`
+
+```bash
+floppy devices [-v]
+```
+
+- Lists `/dev/sd*` and `/dev/fd*` disks with `RM=1`
+- **`-v`:** label, fstype, mount, heuristic **score** (USB FDD models score higher)
+
+Use before `burn`/`read` when unsure of device node.
+
+---
+
+### `list` — what is attached now
+
+Aliases: `attached`, `ls`
+
+```bash
+floppy list [-v]
+```
+
+| Section | Shows |
+|---------|--------|
+| Loop-attached | `.img` → loop device → mount point |
+| Physical media | Drive with disk inserted (mounted or not) |
+| **`-v` only** | All `.img` files in `FLOPPY_DISKDIR` |
+
+Lighter than `status`; focused on “what can I edit or read right now?”
+
+---
+
+### `status` — full diagnostic snapshot
+
+```bash
+floppy status
+```
+
+Prints: config paths, loop attachments, mounts under `$FLOPPY_MEDIADIR`, verbose removable drive list.
+
+---
+
+## Workflows
+
+### A. Swap disks in the USB drive (stay on same `/dev/sdX`)
+
+```mermaid
+flowchart LR
+    swap[Insert new floppy] --> refresh[floppy refresh --mount]
+    refresh --> devices[floppy devices -v]
+    devices --> next[read / burn / browse]
+```
+
+```bash
+floppy refresh --mount
+floppy devices -v
+```
+
+You do **not** need to replug USB between floppies.
+
+---
+
+### B. Archive a floppy (physical → file)
+
+```bash
+floppy refresh --mount          # optional: browse files first
+floppy devices -v               # expect size 1.4M / 720K, not 0B
+floppy read -y                  # or: floppy read mylabel -y
+floppy list -v                  # confirm image in FLOPPY_DISKDIR
+```
+
+Partial reads with warnings usually mean **damaged sectors**; image may still be useful. `floppy1982469877.img`-style random names meant the volume had no usable label—pass an explicit name: `floppy read disk -y`.
+
+---
+
+### C. Edit an image without hardware
+
+```bash
+floppy attach myproject
+ls /media/$USER/myproject
+floppy detach myproject
+```
+
+---
+
+### D. Restore image to floppy
+
+```bash
+floppy refresh                    # new disk in drive
+floppy burn myproject.img -d /dev/sda
+```
+
+### G. Done for the day — unplug USB drive
+
+```bash
+floppy disconnect                 # unmount + power off
+# unplug USB cable
+```
+
+---
+
+### E. Create a new blank floppy image for a retro project
+
+```bash
+floppy make blank -s 1440
+floppy attach blank --format
+# copy files into mount point
+floppy detach blank
+floppy burn blank.img -d /dev/sda
+```
+
+---
+
+### F. Inspect current state
+
+```bash
+floppy list -v       # attached loops + physical + archive dir
+floppy status        # everything including config
+```
+
+---
+
+## Device selection
+
+When `-d` and `FLOPPY_DEVICE` are unset, `floppy` picks a removable disk:
+
+1. List removable `sd`/`fd` disks via `lsblk`
+2. Score each (higher = more likely USB floppy):
+   - +100 if `MODEL` matches `FLOPPY_DEVICE_MATCH`
+   - +40 if `TRAN=usb`
+   - +30 if size is 360K / 720K / 1.4M
+   - +10 if volume label present
+3. **Auto-select** if exactly one device, or exactly one with score ≥ 100
+4. Otherwise **interactive menu**
+
+Always use `floppy devices -v` when multiple USB storage devices are attached (thumb drives, SD readers, etc.).
+
+---
+
+## Physical drive vs disk images
+
+| | Physical USB floppy | Loop image (`attach`) |
+|--|---------------------|------------------------|
+| Device | `/dev/sda` | `/dev/loopN` |
+| Typical mount | `/media/$USER/<FAT_LABEL>` (udisks) | `/media/$USER/<image_name>` |
+| Create | `refresh`, insert disk | `make`, `attach` |
+| Archive | `read`, `dump` | copy `.img` file |
+| Write | `burn` | `burn` to physical only |
+| Release | `detach <label>`, `refresh` (swap disk) | `detach <name>` |
+| Unplug USB | `disconnect` | — |
+
+---
+
+## Safety
+
+### Burn
+
+- Prompts: `Write image to /dev/sdX? This will ERASE the floppy. [y/N]`
+- Skipped with `-y` only when you are certain
+- Targets **whole disk** (`/dev/sda`), not partitions (`/dev/sda1`)
+- Unmounts before write
+
+### Read / dump
+
+- Prompt unless `-y`
+- Refuses `0B` size (no disk inserted)
+- Does not overwrite existing output without `--force`
+
+### Permissions
+
+Non-root users need `sudo` (or polkit via `udisksctl` for mount/unmount). Configure passwordless sudo only if you accept the security tradeoff on a dedicated retro workstation.
+
+---
+
+## Troubleshooting
+
+### `floppy: no media in /dev/sda` but disk is inserted
+
+- Run `floppy refresh`, then `floppy devices -v` (size should be `1.4M`, not `0B`)
+- Re-seat the disk; try `floppy refresh --eject -w 3`
+
+### Wrong label in `devices -v` (path shown as label)
+
+Fixed in current code (per-field `lsblk`). Update if you see `label=/media/...`.
+
+### `floppy read` uses random name `floppy123456789`
+
+Volume has no FAT label; udisks mounted as `/media/user/disk`. Pass a name: `floppy read disk -y`, or set label on the FAT volume.
+
+### `dd: Input/output error` partway through read
+
+Common on aging floppies. Default `noerror,sync` completes with holes; warnings are printed. Use `--strict` only if you want fail-fast. Try `refresh` before retry; clean drive heads if errors persist.
+
+### `floppy: command not found`
+
+Run `./install.sh` or add `src` to `PATH`. Use `./floppy` from `src` when testing without install.
+
+### `>>> using removable device` mixed into error text
+
+Status must go to stderr (fixed). Update `lib/common.sh` if you see this on old copies.
+
+### Automount fights `read` / `burn`
+
+`read`, `burn`, and `dump` unmount first. Run `floppy refresh` after manual file-manager mounts.
+
+### Leftover empty mount directory after `detach`
+
+e.g. `/media/user/bootdisk (present, not mounted)`. Safe to remove: `rmdir` if empty.
+
+### Device is `/dev/sda` on this machine but `/dev/sdb` elsewhere
+
+Do not rely on fixed names; use `floppy devices` or set `FLOPPY_DEVICE` per host in config.
+
+### Mitsumi drive shows `2880` during refresh
+
+Internal `blockdev --getsz` probe (suppressed in output on current versions).
+
+### `udisks power-off failed` on disconnect
+
+Close file managers using the mount. Run `floppy detach <label>`, then `floppy disconnect` again. You can still unplug after a successful unmount if power-off fails—wait a few seconds for cache flush.
+
+---
+
+## Legacy wrappers
+
+Thin scripts for muscle memory; all call `floppy`:
+
+| Wrapper | Maps to |
+|---------|---------|
+| `floppy-make` | `floppy make "$@"` |
+| `floppy-attach` | `floppy attach` (supports old two-arg size: `floppy-attach name 1440`) |
+| `floppy-burn` | `floppy burn "$1"` |
+
+---
+
+## Limitations
+
+- **Linux only** (uses `losetup`, `lsblk`, udisks)
+- **Debian apt helper** only in `check-deps.sh`; other distros: install packages manually
+- **FAT-focused** for `attach` format (`mkfs.vfat`); raw/non-FAT images can be read/burned but not auto-mounted as vfat
+- **No write-protect detection** beyond mount errors
+- **No internal 5.25" / floppy controller** support beyond what the kernel exposes as `/dev/fd*`
+- **Sector size** assumed 512 bytes for read/burn
+- **Not a GUI**; pairs with desktop automount (udisks) when present
+
+---
+
+## See also
+
+- `floppy help` — built-in usage text
+- `config.example` — starter configuration
+- `check-deps.sh --help` — dependency installer options
\ No newline at end of file
diff --git a/check-deps.sh b/check-deps.sh
new file mode 100755
index 0000000..3916ffb
--- /dev/null
+++ b/check-deps.sh
@@ -0,0 +1,226 @@
+#!/usr/bin/env bash
+# Verify dependencies for floppy-utils on Debian-based systems; optionally install via apt.
+set -euo pipefail
+
+INSTALL=0
+QUIET=0
+
+usage() {
+    cat <<'EOF'
+Usage: check-deps.sh [OPTIONS]
+
+Check that base tools required by floppy-utils are available.
+On Debian, Ubuntu, Raspberry Pi OS, and derivatives, missing packages can be
+installed with apt when --install is passed.
+
+Options:
+  --install, -i   Install missing packages (requires apt and root/sudo)
+  --quiet, -q     Only print errors and the install command
+  -h, --help      Show this help
+
+Examples:
+  ./check-deps.sh
+  ./check-deps.sh --install
+  sudo ./check-deps.sh -i
+EOF
+}
+
+while [[ $# -gt 0 ]]; do
+    case "$1" in
+        --install|-i) INSTALL=1; shift ;;
+        --quiet|-q) QUIET=1; shift ;;
+        -h|--help) usage; exit 0 ;;
+        *) echo "check-deps.sh: unknown option: $1" >&2; usage >&2; exit 2 ;;
+    esac
+done
+
+log() {
+    [[ "$QUIET" -eq 0 ]] && echo "$@"
+}
+
+warn() {
+    echo "check-deps.sh: $*" >&2
+}
+
+die() {
+    warn "$*"
+    exit 1
+}
+
+is_debian_like() {
+    if [[ -f /etc/debian_version ]]; then
+        return 0
+    fi
+    if [[ -f /etc/os-release ]]; then
+        # shellcheck source=/dev/null
+        source /etc/os-release
+        case "${ID:-}:${ID_LIKE:-}" in
+            debian:*|*debian*|ubuntu:*|*ubuntu*|raspbian:*|linuxmint:*|pop:*|elementary:*|kali:*|devuan:*)
+                return 0
+                ;;
+        esac
+    fi
+    return 1
+}
+
+os_description() {
+    if [[ -f /etc/os-release ]]; then
+        # shellcheck source=/dev/null
+        source /etc/os-release
+        printf '%s %s\n' "${NAME:-Linux}" "${VERSION_ID:-}"
+    elif [[ -f /etc/debian_version ]]; then
+        printf 'Debian %s\n' "$(cat /etc/debian_version)"
+    else
+        echo "Unknown"
+    fi
+}
+
+# command -> Debian package providing it
+declare -A CMD_PKG=(
+    [lsblk]=util-linux
+    [blockdev]=util-linux
+    [losetup]=util-linux
+    [findmnt]=util-linux
+    [fdisk]=util-linux
+    [blkid]=util-linux
+    [mount]=mount
+    [umount]=mount
+    [dd]=coreutils
+    [readlink]=coreutils
+    [mkfs.vfat]=dosfstools
+    [sudo]=sudo
+    [udisksctl]=udisks2
+    [udevadm]=udev
+    [eject]=eject
+)
+
+REQUIRED_CMDS=(
+    lsblk blockdev losetup findmnt blkid mount umount dd readlink mkfs.vfat
+)
+
+RECOMMENDED_CMDS=(
+    sudo udisksctl udevadm eject fdisk
+)
+
+have_cmd() {
+    command -v "$1" >/dev/null 2>&1
+}
+
+packages_for_cmds() {
+    local -A seen=()
+    local cmd pkg
+    for cmd in "$@"; do
+        pkg="${CMD_PKG[$cmd]:-}"
+        [[ -n "$pkg" && -z "${seen[$pkg]:-}" ]] || continue
+        seen[$pkg]=1
+        printf '%s\n' "$pkg"
+    done
+}
+
+check_cmds() {
+    local label="$1"
+    local required="$2"
+    shift 2
+    local cmd
+    local -a missing=()
+
+    log "$label"
+    for cmd in "$@"; do
+        if have_cmd "$cmd"; then
+            log "  OK   $cmd"
+        else
+            if [[ "$required" -eq 1 ]]; then
+                log "  MISS $cmd (required)"
+            else
+                log "  MISS $cmd (recommended)"
+            fi
+            missing+=("$cmd")
+        fi
+    done
+    log ""
+
+    MISSING_RESULT=("${missing[@]}")
+}
+
+run_apt_install() {
+    local -a packages=("$@")
+    [[ ${#packages[@]} -gt 0 ]] || return 0
+
+    if ! command -v apt-get >/dev/null 2>&1; then
+        die "apt-get not found; install manually: ${packages[*]}"
+    fi
+
+    local -a apt_cmd=(apt-get)
+    if [[ "$(id -u)" -ne 0 ]]; then
+        command -v sudo >/dev/null 2>&1 || die "root or sudo required to install: ${packages[*]}"
+        apt_cmd=(sudo apt-get)
+    fi
+
+    log "Installing: ${packages[*]}"
+    "${apt_cmd[@]}" update -qq
+    DEBIAN_FRONTEND=noninteractive "${apt_cmd[@]}" install -y --no-install-recommends "${packages[@]}"
+}
+
+main() {
+    local -a missing_required=() missing_recommended=() packages=()
+    local debian=0
+
+    log "floppy-utils dependency check"
+    log "OS: $(os_description)"
+
+    if is_debian_like; then
+        debian=1
+        log "Debian-based system detected."
+    else
+        warn "Not a Debian-based system — will check commands only (no apt install)."
+    fi
+    log ""
+
+    check_cmds "Required commands:" 1 "${REQUIRED_CMDS[@]}"
+    missing_required=("${MISSING_RESULT[@]}")
+    check_cmds "Recommended commands:" 0 "${RECOMMENDED_CMDS[@]}"
+    missing_recommended=("${MISSING_RESULT[@]}")
+
+    if [[ ${#missing_required[@]} -eq 0 && ${#missing_recommended[@]} -eq 0 ]]; then
+        log "All required and recommended commands are available."
+        exit 0
+    fi
+
+    if [[ ${#missing_required[@]} -gt 0 ]]; then
+        log "Missing required: ${missing_required[*]}"
+    fi
+    if [[ ${#missing_recommended[@]} -gt 0 ]]; then
+        log "Missing recommended: ${missing_recommended[*]}"
+    fi
+
+    mapfile -t packages < <(packages_for_cmds "${missing_required[@]}" "${missing_recommended[@]}")
+    if [[ ${#packages[@]} -gt 0 ]]; then
+        log "Debian packages: ${packages[*]}"
+    fi
+
+    if [[ "$INSTALL" -eq 1 ]]; then
+        [[ "$debian" -eq 1 ]] || die "refusing --install on non-Debian system"
+        run_apt_install "${packages[@]}"
+        log ""
+        log "Re-checking..."
+        INSTALL=0
+        main
+        return
+    fi
+
+    if [[ "$debian" -eq 1 && ${#packages[@]} -gt 0 ]]; then
+        log ""
+        log "To install:"
+        log "  sudo ./check-deps.sh --install"
+        log "  # or: sudo apt-get install -y ${packages[*]}"
+    fi
+
+    if [[ ${#missing_required[@]} -gt 0 ]]; then
+        die "required dependencies missing"
+    fi
+
+    warn "recommended tools missing — floppy-utils works with reduced functionality"
+    exit 0
+}
+
+main
\ No newline at end of file
diff --git a/config.example b/config.example
new file mode 100644
index 0000000..abeca8a
--- /dev/null
+++ b/config.example
@@ -0,0 +1,10 @@
+# Copy to ~/.config/floppy-utils/config and adjust paths.
+
+# FLOPPY_DISKDIR="$HOME/Retro/BLANKS"
+# FLOPPY_MEDIADIR="/media/$USER"
+
+# Mitsumi USB UFDD on this machine (when no other removable disks attached):
+# FLOPPY_DEVICE=/dev/sda
+
+# FLOPPY_DEFAULT_SIZE_KB=1440
+# FLOPPY_DEVICE_MATCH='mitsumi|ufdd|fdd|floppy'
\ No newline at end of file
diff --git a/install.sh b/install.sh
new file mode 100755
index 0000000..a33879e
--- /dev/null
+++ b/install.sh
@@ -0,0 +1,23 @@
+#!/usr/bin/env bash
+# Install floppy-utils scripts to ~/.local/bin
+set -euo pipefail
+
+ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+if [[ -x "$ROOT/check-deps.sh" ]]; then
+    "$ROOT/check-deps.sh" -q || {
+        echo "Run ./check-deps.sh --install to fix missing dependencies." >&2
+        exit 1
+    }
+fi
+
+SRC="$ROOT/src"
+DEST="${HOME}/.local/bin"
+
+mkdir -p "$DEST"
+for cmd in floppy floppy-make floppy-attach floppy-burn; do
+    install -m 755 "$SRC/$cmd" "$DEST/$cmd"
+done
+
+echo "Installed to $DEST"
+echo "Ensure \$HOME/.local/bin is on your PATH, then run: floppy help"
\ No newline at end of file
diff --git a/src/floppy b/src/floppy
new file mode 100755
index 0000000..9dc74b5
--- /dev/null
+++ b/src/floppy
@@ -0,0 +1,309 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+FLOPPY_SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# shellcheck source=lib/common.sh
+source "$FLOPPY_SCRIPT_DIR/lib/common.sh"
+floppy_load_config
+
+floppy_parse_size() {
+    local size="${1:-$FLOPPY_DEFAULT_SIZE_KB}"
+    case "$size" in
+        360|720|1440) echo "$size" ;;
+        360K|720K|1440K|1.44M|1.44m) echo "${size%K}" | sed 's/1.44M/1440/i' ;;
+        *) floppy_die "invalid size: $size (use 360, 720, or 1440)" ;;
+    esac
+}
+
+floppy_cmd_make() {
+    local name="" size_kb="$FLOPPY_DEFAULT_SIZE_KB"
+
+    while [[ $# -gt 0 ]]; do
+        case "$1" in
+            -s|--size)
+                [[ $# -ge 2 ]] || floppy_die "$1 requires a value"
+                size_kb="$(floppy_parse_size "$2")"
+                shift 2
+                ;;
+            -h|--help)
+                echo "Usage: floppy make [name] [-s 360|720|1440]"
+                return 0
+                ;;
+            -*)
+                floppy_die "unknown option: $1"
+                ;;
+            *)
+                [[ -z "$name" ]] || floppy_die "unexpected argument: $1"
+                name="$1"
+                shift
+                ;;
+        esac
+    done
+
+    if [[ -z "$name" ]]; then
+        name="$(floppy_random_name)"
+    fi
+
+    floppy_create_blank "$name" "$size_kb" >/dev/null
+    floppy_info "created $(floppy_image_path_in_diskdir "$name")"
+}
+
+floppy_cmd_devices() {
+    local verbose=0
+    while [[ $# -gt 0 ]]; do
+        case "$1" in
+            -v|--verbose) verbose=1; shift ;;
+            -h|--help)
+                echo "Usage: floppy devices [-v]"
+                return 0
+                ;;
+            *) floppy_die "unknown option: $1" ;;
+        esac
+    done
+
+    local out
+    out="$(floppy_list_devices "$verbose")"
+    if [[ -z "$out" ]]; then
+        echo "No removable block devices found."
+        echo "Connect a USB floppy drive and run again."
+        return 0
+    fi
+    echo "Removable block devices (candidates for burn):"
+    echo "$out"
+}
+
+main() {
+    local cmd="${1:-help}"
+    shift || true
+
+    case "$cmd" in
+        make)
+            floppy_cmd_make "$@"
+            ;;
+        attach|mount)
+            local image_arg="" size_kb="$FLOPPY_DEFAULT_SIZE_KB" format="auto"
+            while [[ $# -gt 0 ]]; do
+                case "$1" in
+                    -s|--size)
+                        [[ $# -ge 2 ]] || floppy_die "$1 requires a value"
+                        size_kb="$(floppy_parse_size "$2")"
+                        shift 2
+                        ;;
+                    --format) format=yes; shift ;;
+                    --no-format) format=no; shift ;;
+                    -h|--help)
+                        echo "Usage: floppy attach [name|path] [-s SIZE] [--format|--no-format]"
+                        return 0
+                        ;;
+                    -*)
+                        floppy_die "unknown option: $1"
+                        ;;
+                    *)
+                        [[ -z "$image_arg" ]] || floppy_die "unexpected argument: $1"
+                        image_arg="$1"
+                        shift
+                        ;;
+                esac
+            done
+            floppy_cmd_attach "$image_arg" "$size_kb" "$format"
+            ;;
+        detach|umount)
+            [[ $# -ge 1 ]] || floppy_die "usage: floppy detach <name|mountpoint|loop>"
+            floppy_cmd_detach "$1"
+            ;;
+        read|archive)
+            local name="" device="" yes=0 force=0 strict=0
+            while [[ $# -gt 0 ]]; do
+                case "$1" in
+                    -d|--device)
+                        [[ $# -ge 2 ]] || floppy_die "$1 requires a value"
+                        device="$2"
+                        shift 2
+                        ;;
+                    -y|--yes) yes=1; shift ;;
+                    --force) force=1; shift ;;
+                    --strict) strict=1; shift ;;
+                    -h|--help)
+                        echo "Usage: floppy read [name] [-d /dev/sdX] [-y] [--force] [--strict]"
+                        echo "  Archives inserted floppy to FLOPPY_DISKDIR/<name>.img"
+                        echo "  Default name: volume label, else mount dir name (e.g. disk), else random"
+                        echo "  Uses dd conv=noerror,sync for bad sectors unless --strict"
+                        return 0
+                        ;;
+                    -*)
+                        floppy_die "unknown option: $1"
+                        ;;
+                    *)
+                        [[ -z "$name" ]] || floppy_die "unexpected argument: $1"
+                        name="$1"
+                        shift
+                        ;;
+                esac
+            done
+            floppy_cmd_read "$name" "$device" "$yes" "$force" "$strict"
+            ;;
+        dump|copy)
+            local output="" device="" yes=0 force=0 strict=0
+            while [[ $# -gt 0 ]]; do
+                case "$1" in
+                    -o|--output)
+                        [[ $# -ge 2 ]] || floppy_die "$1 requires a value"
+                        output="$2"
+                        shift 2
+                        ;;
+                    -d|--device)
+                        [[ $# -ge 2 ]] || floppy_die "$1 requires a value"
+                        device="$2"
+                        shift 2
+                        ;;
+                    -y|--yes) yes=1; shift ;;
+                    --force) force=1; shift ;;
+                    --strict) strict=1; shift ;;
+                    -h|--help)
+                        echo "Usage: floppy dump -o FILE [-d /dev/sdX] [-y] [--force] [--strict]"
+                        echo "  Raw sector-for-sector copy; use -o - for stdout"
+                        return 0
+                        ;;
+                    -*)
+                        floppy_die "unknown option: $1"
+                        ;;
+                    *)
+                        floppy_die "unexpected argument: $1 (use -o FILE)"
+                        ;;
+                esac
+            done
+            [[ -n "$output" ]] || floppy_die "usage: floppy dump -o FILE [-d DEVICE]"
+            floppy_cmd_dump "$output" "$device" "$yes" "$force" "$strict"
+            ;;
+        burn|write)
+            local image="" device="" yes=0
+            while [[ $# -gt 0 ]]; do
+                case "$1" in
+                    -d|--device)
+                        [[ $# -ge 2 ]] || floppy_die "$1 requires a value"
+                        device="$2"
+                        shift 2
+                        ;;
+                    -y|--yes) yes=1; shift ;;
+                    -h|--help)
+                        echo "Usage: floppy burn <image> [-d /dev/sdX] [-y]"
+                        return 0
+                        ;;
+                    -*)
+                        floppy_die "unknown option: $1"
+                        ;;
+                    *)
+                        [[ -z "$image" ]] || floppy_die "unexpected argument: $1"
+                        image="$1"
+                        shift
+                        ;;
+                esac
+            done
+            [[ -n "$image" ]] || floppy_die "usage: floppy burn <image> [-d DEVICE] [-y]"
+            floppy_cmd_burn "$image" "$device" "$yes"
+            ;;
+        devices|list-devices)
+            floppy_cmd_devices "$@"
+            ;;
+        list|attached|ls)
+            local verbose=0
+            while [[ $# -gt 0 ]]; do
+                case "$1" in
+                    -v|--verbose) verbose=1; shift ;;
+                    -h|--help)
+                        echo "Usage: floppy list [-v]"
+                        echo "  Loop-mounted .img files and physical floppy media in the drive"
+                        return 0
+                        ;;
+                    *) floppy_die "unknown option: $1" ;;
+                esac
+            done
+            floppy_cmd_list "$verbose"
+            ;;
+        refresh|rescan|reload)
+            local device="" do_eject=0 do_mount=0 wait_secs=2
+            while [[ $# -gt 0 ]]; do
+                case "$1" in
+                    -d|--device)
+                        [[ $# -ge 2 ]] || floppy_die "$1 requires a value"
+                        device="$2"
+                        shift 2
+                        ;;
+                    --eject) do_eject=1; shift ;;
+                    --mount) do_mount=1; shift ;;
+                    -w|--wait)
+                        [[ $# -ge 2 ]] || floppy_die "$1 requires a value"
+                        wait_secs="$2"
+                        shift 2
+                        ;;
+                    -h|--help)
+                        cat <<'EOF'
+Usage: floppy refresh [-d /dev/sdX] [--mount] [--eject] [-w SEC]
+
+  Run after swapping floppies in the same USB drive (without unplugging USB).
+  Unmounts stale filesystem state, flushes buffers, and re-probes media size/label.
+
+  --mount   Mount the new disk via udisks when media is detected
+  --eject   Call eject(1) first (some Mitsumi/USB FDD units need this)
+  -w SEC    Wait before re-probe (default 2)
+EOF
+                        return 0
+                        ;;
+                    -*)
+                        floppy_die "unknown option: $1"
+                        ;;
+                    *)
+                        floppy_die "unexpected argument: $1"
+                        ;;
+                esac
+            done
+            floppy_cmd_refresh "$device" "$do_eject" "$do_mount" "$wait_secs"
+            ;;
+        disconnect|power-off|eject-usb)
+            local device=""
+            while [[ $# -gt 0 ]]; do
+                case "$1" in
+                    -d|--device)
+                        [[ $# -ge 2 ]] || floppy_die "$1 requires a value"
+                        device="$2"
+                        shift 2
+                        ;;
+                    -h|--help)
+                        cat <<'EOF'
+Usage: floppy disconnect [-d /dev/sdX]
+
+  Safely finish work with the USB floppy drive:
+    1. Unmount any mounted volume on the device
+    2. Flush block device buffers
+    3. Power off via udisks (or eject as fallback)
+
+  After success, unplug the USB cable. Use this when done for the day — not when
+  swapping floppies (use "floppy refresh" instead).
+
+Aliases: power-off, eject-usb
+EOF
+                        return 0
+                        ;;
+                    -*)
+                        floppy_die "unknown option: $1"
+                        ;;
+                    *)
+                        floppy_die "unexpected argument: $1"
+                        ;;
+                esac
+            done
+            floppy_cmd_disconnect "$device"
+            ;;
+        status)
+            floppy_cmd_status
+            ;;
+        help|--help|-h)
+            floppy_usage
+            ;;
+        *)
+            floppy_die "unknown command: $cmd (try: floppy help)"
+            ;;
+    esac
+}
+
+main "$@"
\ No newline at end of file
diff --git a/src/floppy-attach b/src/floppy-attach
index e25b943..8664e0b 100755
--- a/src/floppy-attach
+++ b/src/floppy-attach
@@ -1,59 +1,15 @@
 #!/usr/bin/env bash
-
-MEDIADIR="/media/gmgauthier"
-format=0 # Don't format disk images that already exist
-
-# get name of freshly created blank disk, or create one
-if [ $# -eq 0 ]; then
-    echo ">>> NEW 1.44MB DISK IS BEING CREATED..."
-    PREFIX="floppy"
-    RANDO=$(od -An -N4 -i < /dev/urandom|sed 's/[ -]//g')
-    DISK="$PREFIX$RANDO"
-    dd if=/dev/zero of=$DISK.img bs=1k count=1440
-    format=1
+# Legacy wrapper: positional args map to attach [name] -s SIZE
+set -euo pipefail
+dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+if [[ $# -eq 0 ]]; then
+    exec "$dir/floppy" attach
+elif [[ $# -eq 1 ]]; then
+    exec "$dir/floppy" attach "$1"
+elif [[ $# -eq 2 ]]; then
+    exec "$dir/floppy" attach "$1" -s "$2"
 else
-    DISK=$1
-    if [ $# -eq 1 ]; then
-        echo "Second argument should be disk size in kbytes: 360, 720, 1440"
-        exit 1
-    fi
-    SIZE=$2
-    if ! [ -f $DISK.img ]; then
-        dd if=/dev/zero of=$DISK.img bs=1k count=$SIZE
-        format=1
-    fi
-fi
-
-# Find the next available loop device on the system
-echo ">>> LOOP DEVICE IS BEING IDENTIFIED..."
-list=$(losetup -O name|sed 's/\/dev\/loop//g'|sed 's/NAME//g'|sort - --sort=human-numeric)
-### listarr=(${(@s: :)list}) # zsh version of the array generator
-listarr=($(echo $list | tr " " "\n")) #bash version of array generator
-lastdev=${listarr[-1]}
-lastdevnum=$((lastdev))
-nextdev=$((lastdevnum+1))
-
-# allocate the next available loop device, format the disk, and mount it.
-nextdevname="/dev/loop$nextdev"
-echo ">>> LOOP DEVICE $nextdevname RESERVED FOR DISK: $DISK.img"
-
-sudo losetup $nextdevname $DISK.img
-
-if [ $format -eq 1 ]; then
-    echo ">>> DISK IMAGE IS RAW AND WILL BE FORMATTED"
-    sudo mkfs -t vfat $nextdevname
-fi
-
-if ! [ -d $MEDIADIR/$DISK ]; then
-    echo ">>> MOUNT DIRECTORY NOT FOUND. CREATING DIRECTORY NOW."
-    sudo mkdir $MEDIADIR/$DISK                                          
-fi
-
-echo ">>> DISK $DISK.img MOUNTING AT LOCATION: $MEDIADIR/$DISK"
-sudo mount $DISK.img $MEDIADIR/$DISK
-
-if [ $format -eq 1 ]; then
-    echo ">>> DISK INFORMATION BEING COPIED TO $DISK.img"
-    sudo fdisk -l $nextdevname >> $DISK-fdisk.txt
-    sudo cp $DISK-fdisk.txt $MEDIADIR/$DISK/$DISK.txt && rm $DISK-fdisk.txt
-fi
+    echo "Usage: floppy-attach [name] [size_kb]" >&2
+    echo "       or: floppy attach [name] [-s SIZE]" >&2
+    exit 1
+fi
\ No newline at end of file
diff --git a/src/floppy-burn b/src/floppy-burn
index ba5de4e..4440d1e 100755
--- a/src/floppy-burn
+++ b/src/floppy-burn
@@ -1,8 +1,10 @@
 #!/usr/bin/env bash
-
-if [[ $# -ne 1 ]]; then
-    echo "Supply the disk image filepath to burn to disk"
-    exit 1
+# Legacy wrapper: single positional arg = image path
+set -euo pipefail
+dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+if [[ $# -eq 1 ]]; then
+    exec "$dir/floppy" burn "$1"
 fi
-
-sudo dd if="$1" of=/dev/sda bs=512 conv=sync ; sync
+echo "Usage: floppy-burn <image>" >&2
+echo "       or: floppy burn <image> [-d DEVICE] [-y]" >&2
+exit 1
\ No newline at end of file
diff --git a/src/floppy-make b/src/floppy-make
index 912554c..f67062a 100755
--- a/src/floppy-make
+++ b/src/floppy-make
@@ -1,23 +1,2 @@
 #!/usr/bin/env bash
-
-DISKDIR="/home/gmgauthier/Retro/BLANKS"
-
-# get name of freshly created blank disk, or create one
-if [ $# -eq 0 ]; then
-    echo ">>> NEW 1.44MB DISK IS BEING CREATED..."
-    PREFIX="floppy"
-    RANDO=$(od -An -N4 -i < /dev/urandom|sed 's/[ -]//g')
-    DISK="$PREFIX$RANDO"
-    dd if=/dev/zero of=$DISKDIR/$DISK.img bs=1k count=1440
-else
-    DISK=$1
-    if [ $# -eq 1 ]; then
-        echo "Second argument should be disk size in kbytes: 360, 720, 1440"
-        exit 1
-    fi
-    SIZE=$2
-    if ! [ -f $DISK.img ]; then
-        dd if=/dev/zero of=$DISKDIR/$DISK.img bs=1k count=$SIZE
-    fi
-fi
-
+exec "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/floppy" make "$@"
\ No newline at end of file
diff --git a/src/lib/common.sh b/src/lib/common.sh
new file mode 100644
index 0000000..602fb02
--- /dev/null
+++ b/src/lib/common.sh
@@ -0,0 +1,1019 @@
+# Shared helpers for floppy-utils. Source from src/floppy only.
+[[ -n "${_FLOPPY_COMMON_LOADED:-}" ]] && return 0
+_FLOPPY_COMMON_LOADED=1
+
+FLOPPY_LIB_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+FLOPPY_SCRIPT_DIR="$(cd "$FLOPPY_LIB_DIR/.." && pwd)"
+
+floppy_load_config() {
+    local cfg="${XDG_CONFIG_HOME:-$HOME/.config}/floppy-utils/config"
+    if [[ -f "$cfg" ]]; then
+        # shellcheck source=/dev/null
+        source "$cfg"
+    fi
+    : "${FLOPPY_DISKDIR:=$HOME/Retro/BLANKS}"
+    : "${FLOPPY_MEDIADIR:=/media/${USER:-root}}"
+    : "${FLOPPY_DEFAULT_SIZE_KB:=1440}"
+    # USB floppy drives (e.g. Mitsumi UFDD) often appear as /dev/sda with 0B until media is inserted.
+    : "${FLOPPY_DEVICE_MATCH:=mitsumi|ufdd|fdd|floppy}"
+}
+
+floppy_die() {
+    echo "floppy: $*" >&2
+    exit 1
+}
+
+floppy_info() {
+    # Must use stderr: this is called from functions whose stdout is captured (e.g. pick_device).
+    echo ">>> $*" >&2
+}
+
+floppy_warn() {
+    echo "floppy: warning: $*" >&2
+}
+
+floppy_require_cmd() {
+    local cmd
+    for cmd in "$@"; do
+        command -v "$cmd" >/dev/null 2>&1 || floppy_die "required command not found: $cmd"
+    done
+}
+
+floppy_require_root() {
+    [[ "$(id -u)" -eq 0 ]] && return 0
+    command -v sudo >/dev/null 2>&1 || floppy_die "root privileges required (install sudo or run as root)"
+}
+
+floppy_run_root() {
+    floppy_require_root
+    if [[ "$(id -u)" -eq 0 ]]; then
+        "$@"
+    else
+        sudo -n "$@" 2>/dev/null || sudo "$@"
+    fi
+}
+
+floppy_ensure_diskdir() {
+    if [[ ! -d "$FLOPPY_DISKDIR" ]]; then
+        mkdir -p "$FLOPPY_DISKDIR" || floppy_die "cannot create disk directory: $FLOPPY_DISKDIR"
+    fi
+}
+
+floppy_validate_size_kb() {
+    local size="$1"
+    case "$size" in
+        360|720|1440) return 0 ;;
+        *) floppy_die "size must be one of: 360, 720, 1440 (got: $size)" ;;
+    esac
+}
+
+floppy_random_name() {
+    local rando
+    rando="$(od -An -N4 -tu4 < /dev/urandom | tr -d ' ')"
+    echo "floppy${rando}"
+}
+
+# Sanitize volume label / user text for use as a filename.
+floppy_sanitize_name() {
+    local raw="$1"
+    local clean
+    clean="$(echo "$raw" | tr '[:upper:]' '[:lower:]' | tr -cs 'a-z0-9' '_' | sed 's/^_//;s/_$//')"
+    [[ -n "$clean" ]] || clean="floppy"
+    echo "${clean:0:32}"
+}
+
+# Resolve argument to an absolute .img path.
+# Like floppy_resolve_image but returns 1 instead of exiting.
+floppy_try_resolve_image() {
+    local arg="${1:-}"
+    local path base
+
+    [[ -n "$arg" ]] || return 1
+
+    if [[ -f "$arg" ]]; then
+        printf '%s\n' "$(readlink -f "$arg")"
+        return 0
+    fi
+
+    base="${arg%.img}"
+    path="$FLOPPY_DISKDIR/${base}.img"
+    if [[ -f "$path" ]]; then
+        printf '%s\n' "$(readlink -f "$path")"
+        return 0
+    fi
+    return 1
+}
+
+floppy_resolve_image() {
+    local arg="${1:-}"
+    local path base
+
+    [[ -n "$arg" ]] || floppy_die "image name or path required"
+
+    if [[ -f "$arg" ]]; then
+        printf '%s\n' "$(readlink -f "$arg")"
+        return 0
+    fi
+
+    base="${arg%.img}"
+    path="$FLOPPY_DISKDIR/${base}.img"
+    if [[ -f "$path" ]]; then
+        printf '%s\n' "$(readlink -f "$path")"
+        return 0
+    fi
+
+    floppy_die "image not found: $arg (also tried $path)"
+}
+
+floppy_image_basename() {
+    local image="$1"
+    basename "${image%.img}"
+}
+
+floppy_image_path_in_diskdir() {
+    local name="${1%.img}"
+    printf '%s/%s.img\n' "$FLOPPY_DISKDIR" "$name"
+}
+
+floppy_create_blank() {
+    local name="$1"
+    local size_kb="$2"
+    local image
+
+    floppy_validate_size_kb "$size_kb"
+    floppy_ensure_diskdir
+
+    image="$(floppy_image_path_in_diskdir "$name")"
+    if [[ -f "$image" ]]; then
+        floppy_warn "image already exists: $image"
+        printf '%s\n' "$image"
+        return 0
+    fi
+
+    floppy_info "creating ${size_kb}K image: $image"
+    dd if=/dev/zero of="$image" bs=1K count="$size_kb" status=progress 2>/dev/null \
+        || dd if=/dev/zero of="$image" bs=1K count="$size_kb"
+    printf '%s\n' "$(readlink -f "$image")"
+}
+
+# Per-device lsblk field (avoids broken parsing when LABEL is empty).
+floppy_device_field() {
+    local dev="$1"
+    local field="$2"
+    lsblk -dno "$field" "$dev" 2>/dev/null | head -1 | sed 's/^[[:space:]]*//;s/[[:space:]]*$//'
+}
+
+# Volume label, or empty if unknown / invalid.
+floppy_device_label() {
+    local dev="$1"
+    local label
+    label="$(floppy_device_field "$dev" LABEL)"
+    if [[ -z "$label" || "$label" == "/"* ]]; then
+        label="$(blkid -s LABEL -o value "$dev" 2>/dev/null | head -1 | sed 's/^[[:space:]]*//;s/[[:space:]]*$//')"
+    fi
+    if [[ -n "$label" && "$label" != "/"* ]]; then
+        printf '%s\n' "$label"
+        return 0
+    fi
+    return 1
+}
+
+# Score how likely a block device is a USB floppy drive (higher = better match).
+floppy_device_score() {
+    local dev="$1"
+    local model size tran label
+    local score=0
+
+    model="$(floppy_device_field "$dev" MODEL | tr '[:upper:]' '[:lower:]')"
+    size="$(floppy_device_field "$dev" SIZE)"
+    tran="$(floppy_device_field "$dev" TRAN | tr '[:lower:]' '[:upper:]')"
+    label="$(floppy_device_label "$dev" 2>/dev/null || true)"
+
+    if [[ "$model" =~ ${FLOPPY_DEVICE_MATCH} ]]; then
+        score=$((score + 100))
+    fi
+    if [[ "$tran" == "USB" ]]; then
+        score=$((score + 40))
+    fi
+    case "$size" in
+        0|0B) score=$((score + 5)) ;;
+        360K|720K|1.0M|1.2M|1.4M|1.44M) score=$((score + 30)) ;;
+    esac
+    [[ -n "$label" ]] && score=$((score + 10))
+    printf '%s\n' "$score"
+}
+
+# List whole-disk block devices likely to be USB/removable drives (floppy, USB FDD, etc.)
+floppy_list_devices() {
+    local verbose="${1:-0}"
+    local name rm type size tran model label fstype mnt
+    floppy_require_cmd lsblk
+
+    while IFS= read -r name; do
+        [[ -z "$name" ]] && continue
+        rm="$(floppy_device_field "$name" RM)"
+        type="$(floppy_device_field "$name" TYPE)"
+        [[ "$type" == "disk" && "$rm" == "1" ]] || continue
+        [[ "$name" =~ ^/dev/(sd|fd) ]] || continue
+
+        size="$(floppy_device_field "$name" SIZE)"
+        tran="$(floppy_device_field "$name" TRAN)"
+        model="$(floppy_device_field "$name" MODEL)"
+        label="$(floppy_device_label "$name" 2>/dev/null || echo "")"
+        fstype="$(floppy_device_field "$name" FSTYPE)"
+        mnt="$(floppy_device_field "$name" MOUNTPOINT)"
+
+        if [[ "$verbose" -eq 1 ]]; then
+            printf '%s  rm=%s size=%s tran=%s model=%s label=%s fstype=%s mount=%s score=%s\n' \
+                "$name" "$rm" "$size" "$tran" "$model" "${label:-—}" "${fstype:-—}" "${mnt:-—}" \
+                "$(floppy_device_score "$name")"
+        else
+            local extra=""
+            [[ -n "$label" ]] && extra=" label=$label"
+            [[ -n "$mnt" ]] && extra="$extra mount=$mnt"
+            printf '%s  %s  %s  %s%s\n' "$name" "$size" "${tran:-?}" "${model:-unknown}" "$extra"
+        fi
+    done < <(lsblk -dpno NAME,RM,TYPE 2>/dev/null | awk '$2==1 && $3=="disk" && $1 ~ /^\/dev\/(sd|fd)/ {print $1}')
+}
+
+floppy_device_has_media() {
+    local dev="$1"
+    local size
+    size="$(floppy_device_field "$dev" SIZE)"
+    [[ -n "$size" && "$size" != "0" && "$size" != "0B" ]]
+}
+
+floppy_device_show() {
+    local dev="$1"
+    lsblk -d -o NAME,SIZE,MODEL,TRAN,LABEL,FSTYPE,MOUNTPOINT "$dev" 2>/dev/null || true
+}
+
+floppy_device_sectors() {
+    local dev="$1"
+    local sectors
+    floppy_require_cmd blockdev
+    sectors="$(floppy_run_root blockdev --getsz "$dev" 2>/dev/null)" || floppy_die "cannot read size of $dev"
+    if [[ -z "$sectors" || "$sectors" -eq 0 ]]; then
+        if ! floppy_device_has_media "$dev"; then
+            floppy_die "no media detected in $dev (insert a floppy and retry)"
+        fi
+        floppy_die "device $dev reports 0 sectors"
+    fi
+    printf '%s\n' "$sectors"
+}
+
+floppy_device_default_name() {
+    local dev="$1"
+    local label mnt base
+
+    if label="$(floppy_device_label "$dev" 2>/dev/null)"; then
+        floppy_sanitize_name "$label"
+        return 0
+    fi
+
+    # Unlabeled FAT volumes: udisks often mounts as $FLOPPY_MEDIADIR/<name>
+    mnt="$(floppy_device_field "$dev" MOUNTPOINT)"
+    if [[ -n "$mnt" ]]; then
+        base="$(basename "$mnt")"
+        if [[ -n "$base" && "$base" != "/"* ]]; then
+            floppy_sanitize_name "$base"
+            return 0
+        fi
+    fi
+
+    floppy_random_name
+}
+
+floppy_unmount_device() {
+    local dev="$1"
+    local mp unmounted=0
+
+    if command -v udisksctl >/dev/null 2>&1 && floppy_device_mounted "$dev"; then
+        if udisksctl unmount -b "$dev" 2>/dev/null; then
+            floppy_info "unmounted $dev via udisks"
+            return 0
+        fi
+    fi
+
+    while read -r mp; do
+        [[ -n "$mp" ]] || continue
+        floppy_info "unmounting $mp"
+        floppy_run_root umount "$mp" && unmounted=1
+    done < <(lsblk -rn -o MOUNTPOINT "$dev" 2>/dev/null | sed '/^$/d')
+
+    [[ "$unmounted" -eq 1 ]] || floppy_warn "$dev does not appear to be mounted"
+}
+
+# After swapping floppies in the same USB drive: drop stale mounts and re-probe media.
+floppy_cmd_refresh() {
+    local device="${1:-}"
+    local do_eject="${2:-0}"
+    local do_mount="${3:-0}"
+    local wait_secs="${4:-2}"
+
+    floppy_require_cmd lsblk blockdev
+    device="$(floppy_resolve_burn_device "$device")"
+
+    floppy_info "refreshing $device (unmount stale state, re-probe media)"
+    echo "Before:"
+    floppy_device_show "$device"
+    echo ""
+
+    if floppy_device_mounted "$device"; then
+        floppy_unmount_device "$device"
+    fi
+
+    floppy_run_root blockdev --flushbufs "$device" 2>/dev/null || true
+
+    if [[ "$do_eject" -eq 1 ]]; then
+        if command -v eject >/dev/null 2>&1; then
+            floppy_info "ejecting $device (helps some USB FDD firmware notice media change)"
+            floppy_run_root eject "$device" 2>/dev/null \
+                || floppy_warn "eject failed — swap the disk and continue anyway"
+        else
+            floppy_warn "eject command not found; install eject(1) or omit --eject"
+        fi
+    fi
+
+    if command -v udevadm >/dev/null 2>&1; then
+        udevadm settle --timeout=5 2>/dev/null || true
+    fi
+
+    if [[ "$wait_secs" -gt 0 ]]; then
+        floppy_info "waiting ${wait_secs}s for drive/kernel to settle"
+        sleep "$wait_secs"
+    fi
+
+    # Reading size nudges usb-storage to re-check capacity on many drives.
+    floppy_run_root blockdev --getsz "$device" >/dev/null 2>&1 || true
+
+    echo "After:"
+    floppy_device_show "$device"
+    echo ""
+
+    if floppy_device_has_media "$device"; then
+        local label mnt
+        label="$(floppy_device_label "$device" 2>/dev/null || true)"
+        mnt="$(floppy_device_field "$device" MOUNTPOINT)"
+        floppy_info "media detected${label:+ (label: $label)}"
+        if [[ "$do_mount" -eq 1 ]] && [[ -z "$mnt" ]]; then
+            if command -v udisksctl >/dev/null 2>&1; then
+                if udisksctl mount -b "$device" 2>/dev/null; then
+                    mnt="$(lsblk -dno MOUNTPOINT "$device" 2>/dev/null)"
+                    floppy_info "mounted at ${mnt:-?}"
+                else
+                    floppy_warn "udisks mount failed — run: udisksctl mount -b $device"
+                fi
+            else
+                floppy_warn "udisksctl not found; mount manually or use a file manager"
+            fi
+        elif [[ -n "$mnt" ]]; then
+            floppy_info "already mounted at $mnt"
+        fi
+    else
+        floppy_warn "no media detected (size 0B) — insert a disk and run: floppy refresh"
+    fi
+}
+
+# Unmount, flush, and power off USB floppy — safe to unplug the cable afterward.
+floppy_cmd_disconnect() {
+    local device="${1:-}"
+    local powered_off=0
+
+    floppy_require_cmd blockdev
+    device="$(floppy_resolve_burn_device "$device")"
+
+    floppy_info "preparing $device for safe USB removal"
+    floppy_device_show "$device"
+    echo ""
+
+    if floppy_device_mounted "$device"; then
+        floppy_unmount_device "$device"
+    else
+        floppy_info "no filesystem mounted on $device"
+    fi
+
+    floppy_run_root blockdev --flushbufs "$device" 2>/dev/null || true
+    sync
+
+    if command -v udisksctl >/dev/null 2>&1; then
+        if udisksctl power-off -b "$device" 2>/dev/null; then
+            powered_off=1
+            floppy_info "powered off $device via udisks"
+        else
+            floppy_warn "udisks power-off failed for $device"
+        fi
+    else
+        floppy_warn "udisksctl not found — install udisks2 for USB power-off"
+    fi
+
+    if [[ "$powered_off" -eq 0 ]] && command -v eject >/dev/null 2>&1; then
+        if floppy_run_root eject "$device" 2>/dev/null; then
+            powered_off=1
+            floppy_info "ejected $device (fallback)"
+        fi
+    fi
+
+    if command -v udevadm >/dev/null 2>&1; then
+        udevadm settle --timeout=5 2>/dev/null || true
+    fi
+
+    echo ""
+    if [[ "$powered_off" -eq 1 ]]; then
+        echo "Safe to unplug the USB floppy drive now."
+    else
+        echo "Unmount and cache flush completed."
+        echo "Wait a few seconds, then unplug the USB floppy drive."
+        echo "If the device is busy, close file managers and retry: floppy disconnect"
+    fi
+
+    if [[ -b "$device" ]]; then
+        floppy_info "($device still visible until the cable is removed)"
+    fi
+}
+
+floppy_pick_device() {
+    local -a entries=()
+    local line dev score best_dev="" best_score=-1
+
+    while IFS= read -r line; do
+        [[ -n "$line" ]] || continue
+        dev="${line%% *}"
+        score="$(floppy_device_score "$dev")"
+        entries+=("$score $dev")
+        if (( score > best_score )); then
+            best_score=$score
+            best_dev="$dev"
+        fi
+    done < <(floppy_list_devices 0)
+
+    if [[ ${#entries[@]} -eq 0 ]]; then
+        floppy_die "no removable block devices found (is the USB floppy connected?)"
+    fi
+
+    # Auto-select a clear floppy match (e.g. Mitsumi UFDD at /dev/sda).
+    if [[ ${#entries[@]} -eq 1 ]]; then
+        floppy_info "using removable device: ${entries[0]#* }"
+        printf '%s\n' "${entries[0]#* }"
+        return 0
+    fi
+    if (( best_score >= 100 )); then
+        local floppy_like=0 d s
+        for entry in "${entries[@]}"; do
+            s="${entry%% *}"
+            if (( s >= 100 )); then
+                floppy_like=$((floppy_like + 1))
+                best_dev="${entry#* }"
+            fi
+        done
+        if (( floppy_like == 1 )); then
+            floppy_info "using USB floppy drive: $best_dev"
+            printf '%s\n' "$best_dev"
+            return 0
+        fi
+    fi
+
+    echo "Multiple removable devices found:"
+    local i=1 entry s d
+    for entry in "${entries[@]}"; do
+        s="${entry%% *}"
+        d="${entry#* }"
+        echo "  $i) $d  $(lsblk -dno SIZE,MODEL,LABEL,TRAN "$d" 2>/dev/null | tr -s ' ')  (score=$s)"
+        ((i++)) || true
+    done
+    echo -n "Select device number [1-${#entries[@]}]: "
+    read -r choice
+    if [[ ! "$choice" =~ ^[0-9]+$ ]] || (( choice < 1 || choice > ${#entries[@]} )); then
+        floppy_die "invalid selection"
+    fi
+    entry="${entries[$((choice - 1))]}"
+    printf '%s\n' "${entry#* }"
+}
+
+floppy_device_mounted() {
+    local dev="$1"
+    lsblk -n -o MOUNTPOINT "$dev" 2>/dev/null | grep -q .
+}
+
+floppy_resolve_burn_device() {
+    local device="${1:-}"
+
+    if [[ -n "$device" ]]; then
+        [[ -b "$device" ]] || floppy_die "not a block device: $device"
+        printf '%s\n' "$device"
+        return 0
+    fi
+
+    if [[ -n "${FLOPPY_DEVICE:-}" ]]; then
+        [[ -b "$FLOPPY_DEVICE" ]] || floppy_die "FLOPPY_DEVICE is not a block device: $FLOPPY_DEVICE"
+        printf '%s\n' "$FLOPPY_DEVICE"
+        return 0
+    fi
+
+    floppy_pick_device
+}
+
+floppy_confirm_burn() {
+    local image="$1"
+    local device="$2"
+    local yes="${3:-0}"
+
+    echo ""
+    echo "  image:  $image ($(du -h "$image" | cut -f1))"
+    echo "  target: $device"
+    lsblk -d -o NAME,SIZE,MODEL,TRAN,MOUNTPOINT "$device" 2>/dev/null || true
+    echo ""
+
+    if [[ "$yes" -eq 1 ]]; then
+        return 0
+    fi
+
+    if floppy_device_mounted "$device"; then
+        floppy_warn "$device is mounted — it will be unmounted before writing"
+    fi
+
+    echo -n "Write image to $device? This will ERASE the floppy. [y/N] "
+    read -r ans
+    [[ "$ans" =~ ^[Yy]$ ]] || floppy_die "aborted"
+}
+
+# Find loop device backing an image, if any.
+floppy_loop_for_image() {
+    local image="$1"
+    losetup -j "$image" 2>/dev/null | awk -F: '{print $1; exit}'
+}
+
+floppy_mountpoint_for_loop() {
+    local loop="$1"
+    lsblk -n -o MOUNTPOINT "$loop" 2>/dev/null | grep -m1 .
+}
+
+floppy_cmd_attach() {
+    local image_arg="${1:-}"
+    local size_kb="${2:-$FLOPPY_DEFAULT_SIZE_KB}"
+    local do_format="${3:-auto}"
+    local image name mountpoint loop need_format
+
+    floppy_require_cmd losetup mount blkid
+    floppy_ensure_diskdir
+
+    if [[ -z "$image_arg" ]]; then
+        name="$(floppy_random_name)"
+        image="$(floppy_create_blank "$name" "$size_kb")"
+        need_format=1
+    else
+        if [[ -f "$image_arg" ]]; then
+            image="$(readlink -f "$image_arg")"
+            name="$(floppy_image_basename "$image")"
+        elif [[ -f "$(floppy_image_path_in_diskdir "$image_arg")" ]]; then
+            image="$(floppy_resolve_image "$image_arg")"
+            name="$(floppy_image_basename "$image")"
+        else
+            name="${image_arg%.img}"
+            image="$(floppy_create_blank "$name" "$size_kb")"
+            need_format=1
+        fi
+    fi
+
+    if [[ "$do_format" == "yes" ]]; then
+        need_format=1
+    elif [[ "$do_format" == "no" ]]; then
+        need_format=0
+    fi
+
+    loop="$(floppy_loop_for_image "$image")"
+    if [[ -n "$loop" ]]; then
+        floppy_warn "already attached on $loop"
+    else
+        floppy_info "attaching loop device for $image"
+        loop="$(floppy_run_root losetup --find --show "$image")" || floppy_die "losetup failed"
+        floppy_info "loop device: $loop"
+    fi
+
+    if [[ "${need_format:-0}" -eq 1 ]] || ! floppy_run_root blkid "$loop" &>/dev/null; then
+        if [[ "$do_format" == "no" ]]; then
+            floppy_warn "no filesystem on $loop; mount may fail (use --format to create vfat)"
+        else
+            floppy_info "formatting $loop as vfat"
+            floppy_run_root mkfs -t vfat -n "${name:0:11}" "$loop" || floppy_die "mkfs failed"
+            need_format=1
+        fi
+    fi
+
+    mountpoint="$FLOPPY_MEDIADIR/$name"
+    if [[ ! -d "$mountpoint" ]]; then
+        floppy_info "creating mount point: $mountpoint"
+        floppy_run_root mkdir -p "$mountpoint"
+    fi
+
+    if mountpoint -q "$mountpoint" 2>/dev/null; then
+        floppy_info "already mounted at $mountpoint"
+    else
+        floppy_info "mounting $loop at $mountpoint"
+        floppy_run_root mount "$loop" "$mountpoint" || floppy_die "mount failed"
+    fi
+
+    if [[ "${need_format:-0}" -eq 1 ]]; then
+        local info_file="$mountpoint/${name}.txt"
+        floppy_info "saving partition info to $info_file"
+        floppy_run_root fdisk -l "$loop" >"${info_file}.tmp" 2>/dev/null \
+            && floppy_run_root chown "${USER:-root}:${USER:-root}" "${info_file}.tmp" 2>/dev/null \
+            && mv "${info_file}.tmp" "$info_file" \
+            || rm -f "${info_file}.tmp"
+    fi
+
+    echo ""
+    echo "  image:      $image"
+    echo "  loop:       $loop"
+    echo "  mountpoint: $mountpoint"
+}
+
+floppy_cmd_detach() {
+    local target="${1:-}"
+    local image loop mountpoint
+
+    [[ -n "$target" ]] || floppy_die "specify image name, mount point, or loop device"
+
+    if [[ -b "$target" && "$target" =~ ^/dev/loop ]]; then
+        loop="$target"
+        mountpoint="$(floppy_mountpoint_for_loop "$loop")"
+    elif mountpoint -q "$target" 2>/dev/null; then
+        mountpoint="$target"
+        loop="$(findmnt -n -o SOURCE "$mountpoint" 2>/dev/null)"
+    elif [[ -f "$target" ]] || [[ -f "$(floppy_image_path_in_diskdir "$target")" ]]; then
+        image="$(floppy_resolve_image "$target")"
+        loop="$(floppy_loop_for_image "$image")"
+        [[ -n "$loop" ]] || floppy_die "image is not attached: $image"
+        mountpoint="$(floppy_mountpoint_for_loop "$loop")"
+    else
+        # Physical floppy: udisks often mounts at $FLOPPY_MEDIADIR/<LABEL> (e.g. BOOTDISK)
+        if mountpoint -q "$FLOPPY_MEDIADIR/${target}" 2>/dev/null; then
+            mountpoint="$FLOPPY_MEDIADIR/${target}"
+            loop="$(findmnt -n -o SOURCE "$mountpoint" 2>/dev/null)"
+        elif mountpoint -q "$FLOPPY_MEDIADIR/${target%.img}" 2>/dev/null; then
+            mountpoint="$FLOPPY_MEDIADIR/${target%.img}"
+            loop="$(findmnt -n -o SOURCE "$mountpoint" 2>/dev/null)"
+        elif image="$(floppy_try_resolve_image "$target")"; then
+            loop="$(floppy_loop_for_image "$image")"
+            [[ -n "$loop" ]] || floppy_die "image is not attached: $image"
+            mountpoint="$(floppy_mountpoint_for_loop "$loop")"
+        else
+            floppy_die "cannot resolve: $target"
+        fi
+    fi
+
+    if [[ -n "${mountpoint:-}" ]] && mountpoint -q "$mountpoint" 2>/dev/null; then
+        floppy_info "unmounting $mountpoint"
+        floppy_run_root umount "$mountpoint" || floppy_die "umount failed"
+    fi
+
+    if [[ -n "${loop:-}" && "$loop" =~ ^/dev/loop ]]; then
+        floppy_info "detaching $loop"
+        floppy_run_root losetup -d "$loop" || floppy_die "losetup -d failed"
+    elif [[ -n "${loop:-}" && "$loop" =~ ^/dev/sd ]]; then
+        floppy_info "physical drive $loop left attached (no loop device)"
+    fi
+
+    floppy_info "done"
+}
+
+floppy_copy_to_image() {
+    local dev="$1"
+    local image="$2"
+    local sectors="$3"
+    local strict="${4:-0}"
+    local conv="noerror,sync,fsync"
+    local dd_status=0 expected_bytes=$((sectors * 512)) actual_bytes=0
+
+    [[ "$strict" -eq 1 ]] && conv="fsync"
+
+    floppy_info "reading $sectors sectors from $dev into $image (conv=$conv)"
+    set +e
+    floppy_run_root dd if="$dev" of="$image" bs=512 count="$sectors" conv="$conv" status=progress 2>/dev/null
+    dd_status=$?
+    if [[ "$dd_status" -ne 0 ]]; then
+        floppy_run_root dd if="$dev" of="$image" bs=512 count="$sectors" conv="$conv"
+        dd_status=$?
+    fi
+    set -e
+    sync
+
+    if [[ -f "$image" ]]; then
+        actual_bytes="$(wc -c < "$image" | tr -d ' ')"
+    fi
+
+    if [[ "$dd_status" -ne 0 ]]; then
+        floppy_warn "dd exited with status $dd_status ($actual_bytes / $expected_bytes bytes)"
+        if [[ "$strict" -eq 1 ]]; then
+            floppy_die "read failed (use default noerror,sync mode, or retry after: floppy refresh)"
+        fi
+        floppy_warn "image may be incomplete — bad sectors are common on aging floppies"
+    elif [[ "$actual_bytes" -lt "$expected_bytes" ]]; then
+        floppy_warn "short read: $actual_bytes / $expected_bytes bytes — disk may have bad sectors"
+    fi
+}
+
+floppy_copy_to_device() {
+    local image="$1"
+    local dev="$2"
+
+    floppy_info "writing $image to $dev"
+    floppy_run_root dd if="$image" of="$dev" bs=512 conv=fsync status=progress 2>/dev/null \
+        || floppy_run_root dd if="$image" of="$dev" bs=512 conv=fsync
+    sync
+}
+
+floppy_confirm_read() {
+    local dev="$1"
+    local image="$2"
+    local yes="${3:-0}"
+
+    echo ""
+    echo "  source: $dev"
+    floppy_device_show "$dev"
+    echo "  output: $image"
+    if [[ -f "$image" ]]; then
+        echo "  note:   output file exists and will be overwritten"
+    fi
+    echo ""
+
+    [[ "$yes" -eq 1 ]] && return 0
+    echo -n "Archive floppy to $image? [y/N] "
+    read -r ans
+    [[ "$ans" =~ ^[Yy]$ ]] || floppy_die "aborted"
+}
+
+floppy_cmd_read() {
+    local name="${1:-}"
+    local device="${2:-}"
+    local yes="${3:-0}"
+    local force="${4:-0}"
+    local strict="${5:-0}"
+    local image sectors
+
+    floppy_require_cmd dd lsblk blockdev
+    floppy_ensure_diskdir
+    device="$(floppy_resolve_burn_device "$device")"
+
+    if ! floppy_device_has_media "$device"; then
+        floppy_die "no media in $device — insert a floppy (size should show as 360K/720K/1.4M, not 0B)"
+    fi
+
+    if [[ -z "$name" ]]; then
+        name="$(floppy_device_default_name "$device")"
+        floppy_info "using output name: $name (from volume label or mount name)"
+    fi
+    name="${name%.img}"
+    image="$(floppy_image_path_in_diskdir "$name")"
+
+    if [[ -f "$image" && "$force" -ne 1 ]]; then
+        floppy_die "output exists: $image (use --force to overwrite)"
+    fi
+
+    sectors="$(floppy_device_sectors "$device")"
+    floppy_confirm_read "$device" "$image" "$yes"
+
+    if floppy_device_mounted "$device"; then
+        floppy_unmount_device "$device"
+        sleep 1
+    fi
+
+    floppy_copy_to_image "$device" "$image" "$sectors" "$strict"
+    floppy_info "read complete: $image ($(du -h "$image" | cut -f1), target ${sectors} sectors)"
+}
+
+floppy_cmd_dump() {
+    local output="${1:-}"
+    local device="${2:-}"
+    local yes="${3:-0}"
+    local force="${4:-0}"
+    local strict="${5:-0}"
+    local sectors
+
+    [[ -n "$output" ]] || floppy_die "usage: floppy dump -o FILE [-d DEVICE] [-y] [--force]"
+    floppy_require_cmd dd blockdev
+    device="$(floppy_resolve_burn_device "$device")"
+
+    if ! floppy_device_has_media "$device"; then
+        floppy_die "no media in $device — insert a floppy"
+    fi
+
+    if [[ "$output" != "-" ]]; then
+        output="$(readlink -f "$output" 2>/dev/null || echo "$output")"
+        if [[ -e "$output" && "$force" -ne 1 ]]; then
+            floppy_die "output exists: $output (use --force)"
+        fi
+        mkdir -p "$(dirname "$output")" 2>/dev/null || true
+    fi
+
+    sectors="$(floppy_device_sectors "$device")"
+    floppy_confirm_read "$device" "$output" "$yes"
+
+    if floppy_device_mounted "$device"; then
+        floppy_unmount_device "$device"
+        sleep 1
+    fi
+
+    if [[ "$output" == "-" ]]; then
+        floppy_info "dumping $sectors sectors from $device to stdout"
+        floppy_run_root dd if="$device" bs=512 count="$sectors" conv=noerror,sync 2>/dev/null
+    else
+        floppy_copy_to_image "$device" "$output" "$sectors" "$strict"
+        floppy_info "dump complete: $output"
+    fi
+}
+
+floppy_cmd_burn() {
+    local image="$1"
+    local device="${2:-}"
+    local yes="${3:-0}"
+
+    floppy_require_cmd dd lsblk
+    image="$(floppy_resolve_image "$image")"
+    device="$(floppy_resolve_burn_device "$device")"
+
+    floppy_confirm_burn "$image" "$device" "$yes"
+
+    if floppy_device_mounted "$device"; then
+        floppy_unmount_device "$device"
+    fi
+
+    floppy_copy_to_device "$image" "$device"
+    floppy_info "burn complete"
+}
+
+# Parse losetup -a lines into "loop|backing_file".
+floppy_foreach_loop_backing() {
+    local line loop backing
+    while IFS= read -r line; do
+        [[ "$line" =~ ^/dev/loop ]] || continue
+        loop="${line%%:*}"
+        if [[ "$line" =~ \((.+)\)$ ]]; then
+            backing="${BASH_REMATCH[1]}"
+            printf '%s|%s\n' "$loop" "$backing"
+        fi
+    done < <(losetup -a 2>/dev/null)
+}
+
+floppy_cmd_list() {
+    local verbose="${1:-0}"
+    local loop backing mp name label size fstype dev
+    local had_loop=0 had_phys=0
+    local -A attached_images=()
+
+    floppy_require_cmd losetup lsblk findmnt
+    floppy_ensure_diskdir 2>/dev/null || true
+
+    while IFS='|' read -r loop backing; do
+        [[ -n "$backing" ]] && attached_images["$backing"]=1
+    done < <(floppy_foreach_loop_backing)
+
+    echo "Loop-attached disk images:"
+    while IFS='|' read -r loop backing; do
+        [[ -n "$loop" && -n "$backing" ]] || continue
+        [[ "$backing" == *.img ]] || continue
+        had_loop=1
+        name="$(floppy_image_basename "$backing")"
+        mp="$(floppy_mountpoint_for_loop "$loop" 2>/dev/null || true)"
+        if [[ -n "$mp" ]]; then
+            printf '  %-16s  %-10s  →  %s\n' "$name" "$loop" "$mp"
+        else
+            printf '  %-16s  %-10s  (not mounted)\n' "$name" "$loop"
+        fi
+        if [[ "$verbose" -eq 1 ]]; then
+            printf '    %s\n' "$backing"
+        fi
+    done < <(floppy_foreach_loop_backing)
+    [[ "$had_loop" -eq 1 ]] || echo "  (none)"
+
+    echo ""
+    echo "Physical floppy media:"
+    while IFS= read -r dev; do
+        [[ -n "$dev" ]] || continue
+        if ! floppy_device_has_media "$dev" && ! floppy_device_mounted "$dev"; then
+            continue
+        fi
+        had_phys=1
+        size="$(floppy_device_field "$dev" SIZE)"
+        label="$(floppy_device_label "$dev" 2>/dev/null || echo "—")"
+        mp="$(floppy_device_field "$dev" MOUNTPOINT)"
+        if [[ -n "$mp" ]]; then
+            printf '  %-16s  %-6s  label=%s  →  %s\n' "$dev" "$size" "$label" "$mp"
+        else
+            printf '  %-16s  %-6s  label=%s  (not mounted)\n' "$dev" "$size" "$label"
+        fi
+        if [[ "$verbose" -eq 1 ]]; then
+            printf '    model=%s  fstype=%s\n' \
+                "$(floppy_device_field "$dev" MODEL)" "$(floppy_device_field "$dev" FSTYPE)"
+        fi
+    done < <(lsblk -dpno NAME,RM,TYPE 2>/dev/null | awk '$2==1 && $3=="disk" && $1 ~ /^\/dev\/(sd|fd)/ {print $1}')
+    [[ "$had_phys" -eq 1 ]] || echo "  (none)"
+
+    if [[ "$verbose" -eq 1 && -d "$FLOPPY_DISKDIR" ]]; then
+        echo ""
+        echo "Disk images in $FLOPPY_DISKDIR:"
+        local img
+        for img in "$FLOPPY_DISKDIR"/*.img; do
+            [[ -f "$img" ]] || continue
+            name="$(floppy_image_basename "$img")"
+            if [[ -n "${attached_images[$img]:-}" ]]; then
+                printf '  %-16s  %s  [loop-attached]\n' "$name" "$(du -h "$img" | cut -f1)"
+            else
+                printf '  %-16s  %s\n' "$name" "$(du -h "$img" | cut -f1)"
+            fi
+        done
+    fi
+}
+
+floppy_cmd_status() {
+    floppy_require_cmd losetup lsblk findmnt
+    local dev
+    echo "Disk directory: $FLOPPY_DISKDIR"
+    echo "Mount base:     $FLOPPY_MEDIADIR"
+    if [[ -n "${FLOPPY_DEVICE:-}" ]]; then
+        echo "FLOPPY_DEVICE:  $FLOPPY_DEVICE"
+    fi
+    echo ""
+    echo "Attached images (loop):"
+    if losetup -a 2>/dev/null | grep -q '\.img'; then
+        losetup -a | grep '\.img' || true
+    else
+        echo "  (none)"
+    fi
+    echo ""
+    echo "Mounts under $FLOPPY_MEDIADIR:"
+    if [[ -d "$FLOPPY_MEDIADIR" ]]; then
+        local m found=0
+        for m in "$FLOPPY_MEDIADIR"/*; do
+            [[ -e "$m" ]] || continue
+            found=1
+            findmnt -no TARGET,SOURCE,FSTYPE,OPTIONS "$m" 2>/dev/null \
+                || echo "  $m (present, not mounted)"
+        done
+        [[ "$found" -eq 1 ]] || echo "  (empty)"
+    else
+        echo "  (directory does not exist)"
+    fi
+    echo ""
+    echo "Removable drives:"
+    floppy_list_devices 1 || echo "  (none)"
+}
+
+floppy_usage() {
+    cat <<'EOF'
+floppy — create, mount, and burn floppy disk images (USB floppy drives)
+
+Usage:
+  floppy make [name] [-s SIZE]           Create blank .img (default 1440K)
+  floppy attach [name|path] [-s SIZE]    Create/open image, loop-mount for editing
+  floppy detach <name|mount|loop>        Unmount and detach loop device
+  floppy refresh [-d DEV] [--mount]      Re-probe drive after swapping floppies
+  floppy disconnect [-d DEV]             Unmount, power off USB — safe to unplug
+  floppy read [name] [-d DEV] [-y]       Archive physical floppy to FLOPPY_DISKDIR
+  floppy dump -o FILE [-d DEV] [-y]      Raw sector dump to any path (or - for stdout)
+  floppy burn <image> [-d DEV] [-y]      Write image to removable drive
+  floppy devices [-v]                    List candidate USB/removable block devices
+  floppy list [-v]                       List attached images and physical media
+  floppy status                          Full status (config, loops, mounts, drives)
+  floppy help [command]                  Show this help
+
+Options:
+  -s, --size SIZE     Image size in KB: 360, 720, or 1440 (default: 1440)
+  -d, --device DEV    Target block device for burn (e.g. /dev/sdb)
+  -y, --yes           Skip confirmation prompt
+  --force             Overwrite existing output file (read/dump)
+  --strict            Abort read/dump on first I/O error (default: noerror,sync)
+  -o, --output FILE   Output path (dump only; use - for stdout)
+  --mount             Mount new media via udisks after refresh
+  --eject             Run eject(1) before re-probe (some USB FDD drives)
+  -w, --wait SEC      Seconds to wait for media settle (default: 2)
+  --format            Force vfat format on attach (new images only by default)
+  --no-format         Do not format even if image is blank
+
+Environment:
+  FLOPPY_DISKDIR      Directory for .img files (default: ~/Retro/BLANKS)
+  FLOPPY_MEDIADIR     Base mount directory (default: /media/$USER)
+  FLOPPY_DEVICE       Default physical drive (e.g. /dev/sda for Mitsumi UFDD)
+  FLOPPY_DEVICE_MATCH Regex (extended) to prefer USB floppy models in device selection
+  FLOPPY_DEFAULT_SIZE_KB  Default image size (default: 1440)
+
+Config file (optional):
+  ~/.config/floppy-utils/config   Shell snippet, e.g. FLOPPY_DISKDIR=/path/to/BLANKS
+
+Legacy wrappers (same commands):
+  floppy-make, floppy-attach, floppy-burn
+
+Examples:
+  floppy make mydisk -s 720
+  floppy attach mydisk              # mount ~/Retro/BLANKS/mydisk.img
+  floppy attach                     # new random 1.44M image, formatted & mounted
+  floppy detach mydisk
+  floppy devices -v
+  floppy refresh --mount              # after swapping disks in the USB drive
+  floppy read                         # archive to ~/Retro/BLANKS/<volume-label>.img
+  floppy read bootdisk -d /dev/sda
+  floppy dump -o /tmp/bootdisk.img
+  floppy burn mydisk.img -d /dev/sda
+  FLOPPY_DEVICE=/dev/sda floppy read bootdisk -y
+EOF
+}
\ No newline at end of file